TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,732 FT ELB2,732 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABRD Wrigley Unit #0202WA
  • BBRD Wrigley Unit #0203WA
FormationAB
Santa Rosa1,852 MD 8801,882 MD 850
Yates42 MD 2,69036 MD 2,696
Seven Rivers-279 MD 3,011-305 MD 3,037
Queen-1,100 MD 3,832-1,068 MD 3,800
Grayburg-1,483 MD 4,215-1,470 MD 4,202
San Andres-1,687 MD 4,419SAN ANDRES - HIGH FLOWS, H2S, CO-1,600 MD 4,332SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,196 MD 5,928-3,236 MD 5,968
Clear Fork-4,087 MD 6,819-4,083 MD 6,815
Spraberry-4,957 MD 7,689-4,923 MD 7,655
Spraberry Upper-Dean-6,328 MD 9,060-6,328 MD 9,060

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.