TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.2 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,802 FT ELB2,802 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASoa Scharbauer SE #6014WB
  • BSoa Scharbauer SE #0123LS
FormationAB
Santa Rosa1,844 MD 9581,861 MD 941
Rustler1,066 MD 1,7361,056 MD 1,746
Yates-74 MD 2,876-71 MD 2,873
Seven Rivers-434 MD 3,236-430 MD 3,232
Queen-1,216 MD 4,018-1,273 MD 4,075
Grayburg-1,660 MD 4,462-1,675 MD 4,477
San Andres-1,867 MD 4,669SAN ANDRES - HIGH FLOWS, H2S, CO-1,875 MD 4,677SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,389 MD 6,191-3,400 MD 6,202
Clear Fork-4,277 MD 7,079-4,272 MD 7,074
Spraberry-5,063 MD 7,865-5,074 MD 7,876

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.