TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,717 FT ELB2,711 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ARio Nueces 37-44 Unit 1 #241
  • BRio Nueces 37-44 Unit 1 #211
FormationAB
Santa Rosa1,948 MD 7691,711 MD 1,000
Yates1,467 MD 1,25061 MD 2,650
Seven Rivers1,417 MD 1,300-254 MD 2,965
Queen-983 MD 3,700-1,111 MD 3,822
Grayburg-1,694 MD 4,411-1,752 MD 4,463
San Andres-2,318 MD 5,035SAN ANDRES - HIGH FLOWS, H2S, CO-2,394 MD 5,105SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,442 MD 5,159-3,132 MD 5,843
Clear Fork-4,093 MD 6,810-4,074 MD 6,785
Spraberry-4,913 MD 7,630-4,941 MD 7,652
Spraberry Upper-Dean-5,696 MD 8,413-6,310 MD 9,021

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.