TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.2 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,892 FT ELB2,891 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ADiamond Cutter West H #16HS
  • BParks-Coyote 1506 B #2HM
FormationAB
Santa Rosa1,971 MD 9211,931 MD 960
Rustler990 MD 1,902—
Yates-90 MD 2,982-158 MD 3,049
Seven Rivers-181 MD 3,073-263 MD 3,154
Queen-1,477 MD 4,369-1,194 MD 4,085
Grayburg-1,596 MD 4,488-1,610 MD 4,501
San Andres-1,984 MD 4,876SAN ANDRES - HIGH FLOWS, H2S, CO-2,017 MD 4,908SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,286 MD 6,178-3,234 MD 6,125
Clear Fork-4,301 MD 7,193-4,311 MD 7,202
Spraberry-5,153 MD 8,045-5,147 MD 8,038
Spraberry Upper-Dean—-6,443 MD 9,334

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.