TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,747 FT ELB2,746 FT ELSanta RosaSanta RosaSeven RiversSeven RiversYatesYatesQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AShady Oaks I 48-37 #4209H
  • BShady Oaks L 48-37 #2812H
FormationAB
Santa Rosa1,747 MD 1,0001,746 MD 1,000
Seven Rivers1,447 MD 1,3001,446 MD 1,300
Yates117 MD 2,630121 MD 2,625
Queen-725 MD 3,472-721 MD 3,467
Grayburg-1,316 MD 4,063-1,154 MD 3,900
San Andres-1,512 MD 4,259SAN ANDRES - HIGH FLOWS, H2S, CO-1,513 MD 4,259SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,618 MD 5,365-2,607 MD 5,353
Clear Fork-3,978 MD 6,725-3,959 MD 6,705
Spraberry-4,805 MD 7,552-4,454 MD 7,200
Spraberry Upper-Dean-6,133 MD 8,880-5,554 MD 8,300

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.