TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,726 FT ELB2,726 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AJohn Braun B Unit 1 #4141SH
  • BJohn Braun B Unit 1 #4101BH
FormationAB
Santa Rosa1,970 MD 7561,970 MD 756
Yates0 MD 2,7260 MD 2,726
Seven Rivers-307 MD 3,033-307 MD 3,033
Queen-974 MD 3,700-974 MD 3,700
Grayburg-1,604 MD 4,330-1,604 MD 4,330
San Andres-1,775 MD 4,501SAN ANDRES - HIGH FLOWS, H2S, CO-1,775 MD 4,501SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,084 MD 5,810-3,085 MD 5,811
Clear Fork-4,108 MD 6,834-4,108 MD 6,834
Spraberry-4,630 MD 7,356-4,630 MD 7,356
Spraberry Upper-Dean-6,287 MD 9,013-5,554 MD 8,280

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.