TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,685 FT ELB2,685 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ARio Concho 34-46 B #221
  • BRio Concho 34-46 A #212
FormationAB
Santa Rosa1,923 MD 7621,923 MD 762
Yates116 MD 2,569116 MD 2,569
Seven Rivers-264 MD 2,949-264 MD 2,949
Queen-1,056 MD 3,741-1,056 MD 3,741
Grayburg-1,719 MD 4,404-1,719 MD 4,404
San Andres-2,250 MD 4,935SAN ANDRES - HIGH FLOWS, H2S, CO-2,250 MD 4,935SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,112 MD 5,797-3,112 MD 5,797
Clear Fork-4,078 MD 6,763-4,078 MD 6,763
Spraberry-4,914 MD 7,599-4,914 MD 7,599
Spraberry Upper-Dean-6,305 MD 8,990-6,305 MD 8,990

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.