TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,632 FT ELB2,758 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AJohn Braun a Unit 3 #1341SH
  • BJohn Braun a Unit 3 #1311AH
FormationAB
Santa Rosa1,810 MD 8221,936 MD 822
Yates-135 MD 2,767-9 MD 2,767
Seven Rivers-435 MD 3,067-309 MD 3,067
Queen-1,016 MD 3,648-890 MD 3,648
Grayburg-1,702 MD 4,334-1,576 MD 4,334
San Andres-1,864 MD 4,496SAN ANDRES - HIGH FLOWS, H2S, CO-1,738 MD 4,496SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,240 MD 5,872-3,114 MD 5,872
Clear Fork-4,260 MD 6,892-4,134 MD 6,892
Spraberry-4,774 MD 7,406-4,648 MD 7,406
Spraberry Upper-Dean-6,445 MD 9,077-6,319 MD 9,077

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.