TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,000-0-2,000-4,000-6,000SUBSEA FTA2,784 FT ELB2,784 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AAtkins 47-02 Unit 1 #0213AH
  • BAtkins 47-02 Unit 1 #0203BH
FormationAB
Santa Rosa2,041 MD 7432,041 MD 743
Yates91 MD 2,69391 MD 2,693
Seven Rivers-234 MD 3,018-234 MD 3,018
Queen-981 MD 3,765-981 MD 3,765
Grayburg-1,507 MD 4,291-1,497 MD 4,281
San Andres-1,774 MD 4,558SAN ANDRES - HIGH FLOWS, H2S, CO-1,774 MD 4,558SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,290 MD 5,074-2,290 MD 5,074
Clear Fork-3,890 MD 6,674-3,890 MD 6,674
Spraberry-4,403 MD 7,187-4,403 MD 7,187
Spraberry Upper-Dean-6,170 MD 8,954-6,158 MD 8,942

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.