TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,840 FT ELB2,835 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • APegasus Field Unit 3 #5203BH
  • BPegasus Field Unit 3 #5204BH
FormationAB
Santa Rosa1,975 MD 8651,970 MD 865
Rustler1,144 MD 1,6961,139 MD 1,696
Yates-38 MD 2,87848 MD 2,787
Seven Rivers-241 MD 3,081-246 MD 3,081
Queen-845 MD 3,685-850 MD 3,685
Grayburg-1,263 MD 4,103-1,268 MD 4,103
San Andres-1,753 MD 4,593SAN ANDRES - HIGH FLOWS, H2S, CO-1,758 MD 4,593SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,278 MD 5,118-2,283 MD 5,118
Clear Fork-4,103 MD 6,943-4,108 MD 6,943
Spraberry-4,915 MD 7,755-4,920 MD 7,755

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.