TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,746 FT ELB2,746 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ATexas Ten y PU #3614H
  • BTexas Ten y PU #3615H
FormationAB
Santa Rosa1,641 MD 1,1051,634 MD 1,112
Rustler1,125 MD 1,6211,111 MD 1,635
Yates122 MD 2,62493 MD 2,653
Seven Rivers-167 MD 2,913-166 MD 2,912
Queen-924 MD 3,670-939 MD 3,685
Grayburg-1,377 MD 4,123-1,384 MD 4,130
San Andres-1,585 MD 4,331SAN ANDRES - HIGH FLOWS, H2S, CO-1,589 MD 4,335SAN ANDRES - HIGH FLOWS, H2S, CO
Clear Fork-4,041 MD 6,787-4,032 MD 6,778
Spraberry-4,919 MD 7,665-4,910 MD 7,656

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.