TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.4 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA2,686 FT ELB2,653 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberrySpraberry Upper-DeanSpraberry Upper-Dean

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ADriver-Schrock 1423 C #9HM
  • BFamily Man B #2HM
FormationAB
Santa Rosa1,803 MD 8831,810 MD 843
Rustler—1,145 MD 1,508
Yates301 MD 2,385332 MD 2,321
Seven Rivers-42 MD 2,728-17 MD 2,670
Queen-741 MD 3,427-641 MD 3,294
Grayburg-1,211 MD 3,897-1,174 MD 3,827
San Andres-1,386 MD 4,072SAN ANDRES - HIGH FLOWS, H2S, CO-1,313 MD 3,966SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,849 MD 5,535-2,764 MD 5,417
Clear Fork-3,435 MD 6,121-3,388 MD 6,041
Spraberry-4,365 MD 7,051-4,335 MD 6,988
Spraberry Upper-Dean-5,724 MD 8,410-5,711 MD 8,364
Wolfcamp—-5,888 MD 8,541

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.