TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,737 FT ELB2,723 FT ELSanta RosaSanta RosaRustlerRustlerSaladoSaladoYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear Fork

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ATXL 18 Unit 1 #1901BH
  • BTXL 18 Unit 1 #1925SH
FormationAB
Santa Rosa1,920 MD 8171,885 MD 838
Rustler1,025 MD 1,712997 MD 1,726
Salado675 MD 2,062638 MD 2,085
Yates4 MD 2,733-27 MD 2,750
Seven Rivers-312 MD 3,049-289 MD 3,012
Queen-755 MD 3,492-794 MD 3,517
Grayburg-1,574 MD 4,311-1,613 MD 4,336
San Andres-1,742 MD 4,479SAN ANDRES - HIGH FLOWS, H2S, CO-1,766 MD 4,489SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,334 MD 5,071-2,418 MD 5,141
Clear Fork-4,086 MD 6,823-4,152 MD 6,875

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.