TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.2 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,785 FT ELB2,773 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ARio Sabine 39-42 B #224
  • BRio Sabine 39-42 A #213
FormationAB
Santa Rosa1,970 MD 8151,957 MD 816
Rustler1,076 MD 1,7091,177 MD 1,596
Yates1 MD 2,784119 MD 2,654
Seven Rivers-358 MD 3,143-235 MD 3,008
Queen-1,190 MD 3,975-1,125 MD 3,898
Grayburg-1,787 MD 4,572-1,718 MD 4,491
San Andres-2,476 MD 5,261SAN ANDRES - HIGH FLOWS, H2S, CO-2,440 MD 5,213SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,179 MD 5,964-3,157 MD 5,930
Clear Fork-4,082 MD 6,867-4,084 MD 6,857
Spraberry-4,952 MD 7,737-4,963 MD 7,736

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.