TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.2 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,783 FT ELB2,785 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ARio Sabine 39-42 D #141
  • BRio Sabine 39-42 C #234
FormationAB
Santa Rosa1,978 MD 8051,968 MD 817
Rustler1,055 MD 1,7281,082 MD 1,703
Yates16 MD 2,76742 MD 2,743
Seven Rivers-330 MD 3,113-294 MD 3,079
Queen-1,180 MD 3,963-1,154 MD 3,939
Grayburg-1,739 MD 4,522-1,741 MD 4,526
San Andres-2,440 MD 5,223SAN ANDRES - HIGH FLOWS, H2S, CO-2,459 MD 5,244SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,205 MD 5,988-3,178 MD 5,963
Clear Fork-4,080 MD 6,863-4,082 MD 6,867
Spraberry-4,973 MD 7,756-4,951 MD 7,736

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.