TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,646 FT ELB2,617 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ATex-Harvey Spraberry #2244R
  • BTex-Harvey Spraberry #2232
FormationAB
Santa Rosa1,652 MD 9941,623 MD 994
Rustler1,087 MD 1,5591,094 MD 1,523
Yates246 MD 2,400274 MD 2,343
Seven Rivers-65 MD 2,711-38 MD 2,655
Queen-774 MD 3,420-755 MD 3,372
Grayburg-1,204 MD 3,850-1,248 MD 3,865
San Andres-1,887 MD 4,533SAN ANDRES - HIGH FLOWS, H2S, CO-1,864 MD 4,481SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,564 MD 5,210-2,590 MD 5,207
Clear Fork-3,455 MD 6,101-3,451 MD 6,068
Spraberry-4,441 MD 7,087-4,452 MD 7,069

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.