TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,728 FT ELB2,727 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ARio San Jacinto 38-43 Unit 1 #123
  • BRio San Jacinto 38-43 Unit 1 #111
FormationAB
Santa Rosa1,678 MD 1,0501,677 MD 1,050
Rustler1,068 MD 1,6601,033 MD 1,694
Yates44 MD 2,68455 MD 2,672
Seven Rivers-315 MD 3,043-311 MD 3,038
Queen-1,170 MD 3,898-1,130 MD 3,857
Grayburg-1,776 MD 4,504-1,727 MD 4,454
San Andres-2,518 MD 5,246SAN ANDRES - HIGH FLOWS, H2S, CO-2,456 MD 5,183SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,166 MD 5,894-3,167 MD 5,894
Clear Fork-4,070 MD 6,798-4,067 MD 6,794
Spraberry-4,958 MD 7,686-4,960 MD 7,687
Spraberry / Dean-6,312 MD 9,040—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.