TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,739 FT ELB2,739 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ARio San Jacinto 38-43 Unit 1 #142
  • BRio San Jacinto 38-43 Unit 1 #234
FormationAB
Santa Rosa1,691 MD 1,0481,691 MD 1,048
Rustler1,130 MD 1,6091,102 MD 1,637
Yates60 MD 2,67959 MD 2,680
Seven Rivers-301 MD 3,040-273 MD 3,012
Queen-1,136 MD 3,875-1,191 MD 3,930
Grayburg-1,712 MD 4,451-1,711 MD 4,450
San Andres-2,494 MD 5,233SAN ANDRES - HIGH FLOWS, H2S, CO-2,485 MD 5,224SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,182 MD 5,921-3,176 MD 5,915
Clear Fork-4,086 MD 6,825-4,083 MD 6,822
Spraberry-4,977 MD 7,716-4,973 MD 7,712

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.