TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,796 FT ELB2,796 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ATXL 27 Unit 3 #2211AH
  • BTXL 27 Unit 3 #2771JH
FormationAB
Santa Rosa1,775 MD 1,0211,776 MD 1,020
Rustler1,141 MD 1,6551,144 MD 1,652
Yates126 MD 2,670126 MD 2,670
Seven Rivers-318 MD 3,114-238 MD 3,034
Queen-723 MD 3,519-669 MD 3,465
Grayburg-1,541 MD 4,337-1,539 MD 4,335
San Andres-1,734 MD 4,530SAN ANDRES - HIGH FLOWS, H2S, CO-1,732 MD 4,528SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,384 MD 5,180-2,397 MD 5,193
Clear Fork-3,963 MD 6,759-3,962 MD 6,758
Spraberry-4,514 MD 7,310-4,495 MD 7,291

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.