TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,811 FT ELB2,810 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMask HZ Unit #1004LH
  • BMask HZ Unit #1003JH
FormationAB
Santa Rosa1,654 MD 1,1571,657 MD 1,153
Rustler957 MD 1,854961 MD 1,849
Yates-15 MD 2,826-13 MD 2,823
Seven Rivers-383 MD 3,194-381 MD 3,191
Queen-774 MD 3,585-772 MD 3,582
Grayburg-1,247 MD 4,058-1,244 MD 4,054
San Andres-1,781 MD 4,592SAN ANDRES - HIGH FLOWS, H2S, CO-1,781 MD 4,591SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,847 MD 5,658-2,844 MD 5,654
Clear Fork-4,139 MD 6,950-4,135 MD 6,945
Spraberry-5,065 MD 7,876-5,064 MD 7,874

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.