TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,903 FT ELB2,856 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACMC Porterhouse D #1065LS
  • BCMC Porterhouse F #1071US
FormationAB
Santa Rosa1,965 MD 9381,904 MD 952
Rustler1,076 MD 1,8271,058 MD 1,798
Yates-10 MD 2,913-32 MD 2,888
Seven Rivers-344 MD 3,247-361 MD 3,217
Queen-1,183 MD 4,086-1,136 MD 3,992
Grayburg-1,627 MD 4,530-1,614 MD 4,470
San Andres-1,818 MD 4,721SAN ANDRES - HIGH FLOWS, H2S, CO-1,843 MD 4,699SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,298 MD 6,201-3,311 MD 6,167
Clear Fork-4,074 MD 6,977-4,112 MD 6,968
Spraberry-5,503 MD 8,406-4,944 MD 7,800

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.