TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,793 FT ELB2,793 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AShull-Hanks 15H #208H
  • BShull-Hanks 15J #210H
FormationAB
Santa Rosa1,666 MD 1,1271,666 MD 1,127
Rustler1,114 MD 1,6791,118 MD 1,675
Yates45 MD 2,74855 MD 2,738
Seven Rivers-279 MD 3,072-279 MD 3,072
Queen-1,005 MD 3,798-1,001 MD 3,794
Grayburg-1,472 MD 4,265-1,464 MD 4,257
San Andres-1,603 MD 4,396SAN ANDRES - HIGH FLOWS, H2S, CO-1,598 MD 4,391SAN ANDRES - HIGH FLOWS, H2S, CO
Clear Fork-4,060 MD 6,853-4,055 MD 6,848
Spraberry-4,911 MD 7,704-4,905 MD 7,698

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.