TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,0001,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,858 FT ELB2,858 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACMC Ribeye 34/35 A #1112WB
  • BCMC Ribeye 34/35 C #1114US
FormationAB
Santa Rosa2,592 MD 2661,879 MD 979
Rustler1,053 MD 1,8051,050 MD 1,808
Yates-38 MD 2,896-38 MD 2,896
Seven Rivers-375 MD 3,233-384 MD 3,242
Queen-1,215 MD 4,073-1,221 MD 4,079
Grayburg-1,645 MD 4,503-1,647 MD 4,505
San Andres-1,809 MD 4,667SAN ANDRES - HIGH FLOWS, H2S, CO-1,817 MD 4,675SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,316 MD 6,174-3,320 MD 6,178
Clear Fork-4,140 MD 6,998-4,138 MD 6,996
Spraberry-5,008 MD 7,866-5,018 MD 7,876

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.