TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.2 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,942 FT ELB2,942 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ATex Q #103HU
  • BW St NW 36 Unit #3605LS
FormationAB
Santa Rosa1,789 MD 1,1531,785 MD 1,157
Rustler994 MD 1,948—
Yates-163 MD 3,105-132 MD 3,074
Seven Rivers-420 MD 3,362-520 MD 3,462
Queen-862 MD 3,804-866 MD 3,808
Grayburg-1,515 MD 4,457-1,437 MD 4,379
San Andres-1,887 MD 4,829SAN ANDRES - HIGH FLOWS, H2S, CO-1,890 MD 4,832SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-3,411 MD 6,353-3,306 MD 6,248
Clear Fork-4,480 MD 7,422-4,484 MD 7,426
Spraberry-5,355 MD 8,297-5,322 MD 8,264

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.