TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-500-1,000-1,500-2,000-2,500-3,000-3,500SUBSEA FTA1,976 FT ELB1,980 FT ELColeman JunctionColeman JunctionB/Noodle Creek LimeB/Noodle Creek LimeB/Cisco LimeB/Cisco LimeB/Three Finger ShaleB/Three Finger ShaleT/Strawn Sd.T/Strawn Sd.T/Odom LST/Odom LST/Caddo LimeT/Caddo Lime

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AJessie Little #8WI
  • BJessie Little 5 #5
FormationAB
Coleman Junction-470 MD 2,446COLEMAN JUNCTION - CORROSIVE; PO-452 MD 2,432COLEMAN JUNCTION - CORROSIVE; PO
B/Noodle Creek Lime-821 MD 2,797-814 MD 2,794
B/Cisco Lime-1,409 MD 3,385-1,398 MD 3,378
B/Three Finger Shale-2,856 MD 4,832-2,849 MD 4,829
T/Strawn Sd.-3,056 MD 5,032-3,058 MD 5,038
T/Strawn Sand—-3,058 MD 5,038
T/Odom LS-3,284 MD 5,260-3,262 MD 5,242
T/Caddo—-3,354 MD 5,334
T/Caddo Lime-3,391 MD 5,367-3,354 MD 5,334
T/Cambrian Sand—-3,482 MD 5,462
T/Cambrian SD—-3,482 MD 5,462

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.