TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000SUBSEA FTA384 FT ELB384 FT ELNacatochNacatochBlossomBlossomFredericksburgFredericksburgPaluxyPaluxyGlen RoseGlen RoseRodessaRodessaPettitPettitTravis PeakTravis PeakKnowles LimeKnowles Lime

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AFlanagan-Jernigan HV Unit C #3H
  • BFlanagan-Jernigan HV Unit B #2H
FormationAB
Nacatoch-516 MD 900-516 MD 900
Blossom-1,496 MD 1,880-1,496 MD 1,880
Fredericksburg-2,156 MD 2,540-2,156 MD 2,540
Paluxy-2,276 MD 2,660-2,276 MD 2,660
Glen Rose-3,036 MD 3,420-3,036 MD 3,420
Rodessa-4,406 MD 4,790-4,406 MD 4,790
Pettit-5,236 MD 5,620PETTET-5,236 MD 5,620PETTET
Travis Peak-5,586 MD 5,970-5,586 MD 5,970
Cotton Valley-7,721 MD 8,105—
Knowles Lime-7,882 MD 8,266-7,890 MD 8,274
Haynesville—-9,539 MD 9,923

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.