TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.0 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,588 FT ELB2,588 FT ELBone SpringBone SpringWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • APrewit #2
  • BHollywood Unit #1405H
FormationAB
Ford-Delaware—88 MD 2,500
Castile—-212 MD 2,800CASTILLE
Delaware—-2,112 MD 4,700
Bell Canyon—-2,157 MD 4,745
Cherry Canyon—-3,127 MD 5,715
Delaware Consolidated Gas—-3,912 MD 6,500
Bone Spring-7,606 MD 10,1943RD BONE SPRINGS-5,351 MD 7,939BONE SPRINGS
Hoban Sand-7,762 MD 10,350—
Wolfcamp-8,812 MD 11,400-7,887 MD 10,475

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.