TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,562 FT ELB2,565 FT ELDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBone SpringsBone Springs1ST Bone Spring Sand1ST Bone Spring Sand2ND Bone Spring Sand2ND Bone Spring SandPermian (undifferentiat…Permian (undifferentiated)WolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ARodeo State 12 #3H
  • BRodeo State 12 #1
FormationAB
Castile850 MD 1,712CASTILLE—
Rustler—844 MD 1,721
Delaware-2,165 MD 4,727-2,162 MD 4,727
Bell Canyon-2,191 MD 4,753-2,196 MD 4,761
Cherry Canyon-3,157 MD 5,719-3,164 MD 5,729
Bone Springs-5,351 MD 7,913-5,358 MD 7,923
1ST Bone Spring Sand-6,265 MD 8,827-6,262 MD 8,827
2ND Bone Spring Sand-6,842 MD 9,404-6,839 MD 9,404
Permian (undifferentiated)-7,618 MD 10,180PERMIAN-7,629 MD 10,194PERMIAN
Wolfcamp-7,896 MD 10,458-7,899 MD 10,464
Wolfcamp—-7,902 MD 10,467
Wolfcamp B—-8,191 MD 10,756

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.