TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.4 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,556 FT ELB2,593 FT ELFord-DelawareFord-DelawareDelawareDelawareCastileCastileBell CanyonBell CanyonDelaware Consolidated G…Delaware Consolidated GasCherry CanyonCherry CanyonBone SpringBone SpringWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABig Gipper State Unit A #2506H
  • BGutterballs State 14-15 #41H
FormationAB
Ford-Delaware56 MD 2,5001,651 MD 942
Castile-244 MD 2,800CASTILLE-1,611 MD 4,204CASTILLE
Bell Canyon-2,391 MD 4,947-2,411 MD 5,004
Delaware-3,144 MD 5,700-697 MD 3,290
Cherry Canyon-3,334 MD 5,890-3,395 MD 5,988
Delaware Consolidated Gas-3,944 MD 6,500-2,958 MD 5,551
Bone Spring-5,496 MD 8,052BONE SPRINGS-5,554 MD 8,147
1ST Bone Spring—-5,554 MD 8,147
2ND Bone Spring—-6,551 MD 9,144
3RD Bone Spring—-7,074 MD 9,667
Wolfcamp-8,103 MD 10,659-7,977 MD 10,570

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.