TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,527 FT ELB2,528 FT ELCastileCastileFord-DelawareFord-DelawareDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonAvalonAvalonBone SpringsBone Springs1ST Bone Springs Sand1ST Bone Springs Sand

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ALegacy 2623A-C3 #1H
  • BLegacy 2623A-C3 #2H
FormationAB
Castile1,332 MD 1,195CASTILLE1,328 MD 1,200CASTILLE
Ford-Delaware1,632 MD 895-1,572 MD 4,100
Delaware-1,568 MD 4,095-2,367 MD 4,895
Delaware Consolidated Gas-2,368 MD 4,895—
Bell Canyon-2,412 MD 4,939-2,405 MD 4,933
Cherry Canyon-3,268 MD 5,795-3,256 MD 5,784
Brushy Canyon-4,557 MD 7,084-4,549 MD 7,077
Avalon-5,584 MD 8,111-5,604 MD 8,132
Bone Springs-5,663 MD 8,190-5,739 MD 8,267
1ST Bone Springs Sand-6,638 MD 9,165-6,643 MD 9,171
2ND Bone Springs Lime—-7,079 MD 9,607

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.