TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000SUBSEA FTA2,727 FT ELB2,721 FT ELFord-DelawareFord-DelawareDelaware Consolidated G…Delaware Consolidated GasDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBone SpringsBone Springs1ST Bone Spring Sand1ST Bone Spring Sand2ND Bone Spring Shale2ND Bone Spring Shale

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ARussell Long A #T 49H
  • BBarracuda G #C 06H
FormationAB
Castile-1,229 MD 3,956CASTILLE—
Ford-Delaware-2,345 MD 5,072-2,337 MD 5,058
Delaware Consolidated Gas-2,345 MD 5,072-2,337 MD 5,058
Delaware-2,345 MD 5,072-2,337 MD 5,058
Bell Canyon-2,379 MD 5,106-2,366 MD 5,087
Cherry Canyon-3,276 MD 6,003-3,280 MD 6,001
Bone Springs-5,334 MD 8,061-5,334 MD 8,055
1ST Bone Spring Sand-6,053 MD 8,780-6,590 MD 9,311
2ND Bone Spring Shale-6,229 MD 8,956-6,906 MD 9,627
3RD Bone Spring Hoban-7,469 MD 10,196—
Wolfcamp—-7,908 MD 10,629

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.