TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,606 FT ELB2,598 FT ELPermian (undifferentiat…Permian (undifferentiated)CastileCastileDelawareDelawareFord-DelawareFord-DelawareBell CanyonBell CanyonDelaware Consolidated G…Delaware Consolidated GasCherry CanyonCherry CanyonBone SpringBone Spring

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASieber Trust #B 21H
  • BRed Rock B #T 09H
FormationAB
Permian (undifferentiated)1,026 MD 1,580PERMIAN1,208 MD 1,390PERMIAN
Castile316 MD 2,290CASTILLE-437 MD 3,035CASTILLE
Delaware-2,294 MD 4,900-2,317 MD 4,915
Ford-Delaware-2,320 MD 4,926-2,349 MD 4,947
Bell Canyon-2,320 MD 4,926-2,360 MD 4,958
Delaware Consolidated Gas-2,322 MD 4,928-2,360 MD 4,958
Cherry Canyon-3,262 MD 5,868-3,281 MD 5,879
Bone Spring-5,466 MD 8,072BONE SPRINGS-5,488 MD 8,086BONE SPRINGS
Wolfcamp-8,000 MD 10,606—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.