TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,824 FT ELB2,825 FT ELFord-DelawareFord-DelawareCastileCastileDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonDelaware Consolidated G…Delaware Consolidated GasBone SpringBone SpringWolfcampWolfcampPermian (undifferentiat…Permian (undifferentiated)

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AVictory State B 54-14-19 #605H
  • BVictory State E 54-14-19 #606HR
FormationAB
Ford-Delaware324 MD 2,500325 MD 2,500
Castile74 MD 2,750CASTILLE75 MD 2,750CASTILLE
Delaware-1,406 MD 4,230-1,385 MD 4,210
Bell Canyon-1,446 MD 4,270-1,425 MD 4,250
Cherry Canyon-2,406 MD 5,230-2,415 MD 5,240
Delaware Consolidated Gas-3,676 MD 6,500-3,675 MD 6,500
Bone Spring-4,886 MD 7,710BONE SPRINGS-4,915 MD 7,740BONE SPRINGS
Wolfcamp-7,726 MD 10,550-7,715 MD 10,540
Permian (undifferentiated)-8,476 MD 11,300PERMIAN-8,475 MD 11,300PERMIAN

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.