TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,822 FT ELB2,822 FT ELPermian (undifferentiat…Permian (undifferentiated)CastileCastileBell CanyonBell CanyonDelawareDelawareDelaware Consolidated G…Delaware Consolidated GasFord-DelawareFord-DelawareCherry CanyonCherry CanyonBone SpringBone Spring

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AWhite West 30-31 #22NH
  • BWhite West 30-31 #11NH
FormationAB
Permian (undifferentiated)1,801 MD 1,021PERMIAN1,990 MD 832PERMIAN
Castile1,801 MD 1,021CASTILLE1,990 MD 832CASTILLE
Bell Canyon-2,351 MD 5,173-2,358 MD 5,180
Delaware-2,351 MD 5,173-2,358 MD 5,180
Delaware Consolidated Gas-2,389 MD 5,211-2,394 MD 5,216
Ford-Delaware-2,405 MD 5,227-2,440 MD 5,262
Cherry Canyon-3,197 MD 6,019-3,220 MD 6,042
Bone Spring-5,216 MD 8,038BONE SPRINGS-5,255 MD 8,077BONE SPRINGS
Wolfcamp-7,480 MD 10,302—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.