TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.6 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,627 FT ELB2,625 FT ELCastileCastilePermian (undifferentiat…Permian (undifferentiated)Bell CanyonBell CanyonDelawareDelawareDelaware Consolidated G…Delaware Consolidated GasFord-DelawareFord-DelawareCherry CanyonCherry CanyonBone SpringBone SpringWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • APeck 258-257-1N State #11H
  • BState Peck 258-257-3N #13H
FormationAB
Castile1,795 MD 832CASTILLE1,285 MD 1,340CASTILLE
Permian (undifferentiated)1,795 MD 832PERMIAN1,285 MD 1,340PERMIAN
Bell Canyon-2,186 MD 4,813-2,216 MD 4,841
Delaware-2,186 MD 4,813-2,216 MD 4,841
Delaware Consolidated Gas-2,248 MD 4,875-2,260 MD 4,885
Ford-Delaware-2,302 MD 4,929-2,346 MD 4,971
Cherry Canyon-3,164 MD 5,791-3,201 MD 5,826
Bone Spring-5,339 MD 7,966BONE SPRINGS-5,327 MD 7,952BONE SPRINGS
Wolfcamp-7,667 MD 10,294-7,712 MD 10,337

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.