TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.8 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,571 FT ELB2,582 FT ELDelawareDelawareCastileCastileBell CanyonBell CanyonDelaware Consolidated G…Delaware Consolidated GasCherry CanyonCherry CanyonFord-DelawareFord-DelawareBone SpringBone Spring

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABuzzard State '21' Unit #83H
  • BLock Master State A #1755H
FormationAB
Permian (undifferentiated)1,740 MD 831PERMIAN—
Castile1,740 MD 831CASTILLE-218 MD 2,800CASTILLE
Delaware-2,369 MD 4,94082 MD 2,500
Bell Canyon-2,369 MD 4,940-2,431 MD 5,013
Delaware Consolidated Gas-2,410 MD 4,981-2,431 MD 5,013
Cherry Canyon-3,336 MD 5,907-3,344 MD 5,926
Ford-Delaware-2,443 MD 5,014-3,918 MD 6,500
Bone Spring-5,542 MD 8,113BONE SPRINGS-5,554 MD 8,136
First Bone Spring—-6,396 MD 8,978
Second Bone Spring—-7,136 MD 9,718
Third Bone Spring—-7,807 MD 10,389

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.