TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,804 FT ELB2,831 FT ELCastileCastileFord-DelawareFord-DelawareDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonDelaware Consolidated G…Delaware Consolidated GasBone SpringBone SpringWolfcampWolfcampPermian (undifferentiat…Permian (undifferentiated)

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACheckers State Unit 54-12-21 #601H
  • BCheckers State Unit 54-12-21 #602H
FormationAB
Castile1,204 MD 1,600CASTILLE1,231 MD 1,600CASTILLE
Ford-Delaware304 MD 2,500331 MD 2,500
Delaware-1,526 MD 4,330-1,499 MD 4,330
Bell Canyon-1,556 MD 4,360-1,529 MD 4,360
Cherry Canyon-2,536 MD 5,340-2,509 MD 5,340
Delaware Consolidated Gas-3,696 MD 6,500-3,669 MD 6,500
Bone Spring-5,031 MD 7,835BONE SPRINGS-4,994 MD 7,825BONE SPRINGS
Wolfcamp-7,816 MD 10,620-7,812 MD 10,643
Permian (undifferentiated)-8,496 MD 11,300PERMIAN-8,469 MD 11,300PERMIAN

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.