TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.4 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA1,825 FT ELB2,793 FT ELCastileCastileFord-DelawareFord-DelawareDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonDelaware Consolidated G…Delaware Consolidated GasBone SpringBone SpringWolfcampWolfcampPermian (undifferentiat…Permian (undifferentiated)

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ALiberty State Unit 9-69 #602H
  • BCheckers State Unit 54-12-21 #605H
FormationAB
Ford-Delaware-675 MD 2,500293 MD 2,500
Castile-975 MD 2,800CASTILLE1,193 MD 1,600CASTILLE
Delaware-2,489 MD 4,314-1,592 MD 4,385
Cherry Canyon-1,975 MD 3,800-2,602 MD 5,395
Bell Canyon-2,975 MD 4,800-1,627 MD 4,420
Delaware Consolidated Gas-4,675 MD 6,500-3,707 MD 6,500
Bone Spring-6,264 MD 8,089BONE SPRINGS-5,072 MD 7,865BONE SPRINGS
Wolfcamp-8,801 MD 10,626-7,884 MD 10,677
Permian (undifferentiated)-9,475 MD 11,300PERMIAN-8,507 MD 11,300PERMIAN

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.