TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,000-0-2,000-4,000-6,000SUBSEA FTA2,909 FT ELB2,909 FT ELCastileCastilePermian (undifferentiat…Permian (undifferentiated)DelawareDelawareBell CanyonBell CanyonDelaware Consolidated G…Delaware Consolidated GasCherry CanyonCherry CanyonBone SpringBone SpringWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMoon State 55-3-5 Unit #3H
  • BManticore State 55-3-3 Unit #3H
FormationAB
Castile2,025 MD 884CASTILLE1,979 MD 930CASTILLE
Permian (undifferentiated)2,025 MD 884PERMIAN1,979 MD 930PERMIAN
Ford-Delaware—-864 MD 3,773
Bell Canyon-1,057 MD 3,966-767 MD 3,676
Delaware-1,057 MD 3,966-763 MD 3,672
Delaware Consolidated Gas-1,072 MD 3,981-834 MD 3,743
Cherry Canyon-1,996 MD 4,905-1,750 MD 4,659
Bone Spring-4,407 MD 7,316BONE SPRINGS-4,355 MD 7,264BONE SPRINGS
Wolfcamp-7,493 MD 10,402-7,531 MD 10,440

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.