TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.7 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,738 FT ELB2,734 FT ELCastileCastilePermian (undifferentiat…Permian (undifferentiated)Ford-DelawareFord-DelawareDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBone SpringBone SpringWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ADunigan State Unit E 53-6-17 #703HR
  • BSabine Pass 53-4-4 Unit #1H
FormationAB
Castile538 MD 2,200CASTILLE479 MD 2,255CASTILLE
Ford-Delaware238 MD 2,500-1,741 MD 4,475
Delaware-1,672 MD 4,410-1,741 MD 4,475
Bell Canyon-1,712 MD 4,450-1,766 MD 4,500
Cherry Canyon-2,712 MD 5,450-2,735 MD 5,469
Delaware Consolidated Gas-3,762 MD 6,500—
Bone Spring-5,212 MD 7,950BONE SPRINGS-5,221 MD 7,955BONE SPRINGS
Wolfcamp-8,002 MD 10,740-8,040 MD 10,774
Permian (undifferentiated)-8,562 MD 11,300PERMIAN479 MD 2,255PERMIAN

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.