TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.7 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,662 FT ELB2,666 FT ELPermian (undifferentiat…Permian (undifferentiated)CastileCastileBell CanyonBell CanyonDelawareDelawareDelaware Consolidated G…Delaware Consolidated GasFord-DelawareFord-DelawareCherry CanyonCherry CanyonBone SpringBone SpringWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AWeinert State 34-39-6S #13HR
  • BMcCullough 35-38-1S #13H
FormationAB
Permian (undifferentiated)815 MD 1,847PERMIAN1,851 MD 815PERMIAN
Castile815 MD 1,847CASTILLE1,851 MD 815CASTILLE
Bell Canyon-2,402 MD 5,064-2,405 MD 5,071
Delaware-2,402 MD 5,064-2,405 MD 5,071
Delaware Consolidated Gas-2,449 MD 5,111-2,442 MD 5,108
Ford-Delaware-2,510 MD 5,172-2,520 MD 5,186
Cherry Canyon-3,310 MD 5,972-3,313 MD 5,979
Bone Spring-5,396 MD 8,058BONE SPRINGS-5,382 MD 8,048BONE SPRINGS
Wolfcamp-7,721 MD 10,383-7,717 MD 10,383

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.