TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,825 FT ELB2,825 FT ELCastileCastilePermian (undifferentiat…Permian (undifferentiated)Bell CanyonBell CanyonDelawareDelawareDelaware Consolidated G…Delaware Consolidated GasFord / DelawareFord / DelawareCherry CanyonCherry CanyonBone SpringBone SpringBone Spring 2Bone Spring 2Bone Spring 3Bone Spring 3

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AChimera State 56-3-7 Unit #13H
  • BChimera State 56-3-7 Unit #14H
FormationAB
Castile1,908 MD 917CASTILLE1,908 MD 917CASTILLE
Permian (undifferentiated)1,908 MD 917PERMIAN (UNDEFINED)1,908 MD 917PERMIAN (UNDEFINED)
Bell Canyon-487 MD 3,312-486 MD 3,311
Delaware-508 MD 3,333-508 MD 3,333
Delaware Consolidated Gas-540 MD 3,365-541 MD 3,366
Ford / Delaware-609 MD 3,434-602 MD 3,427
Cherry Canyon-1,471 MD 4,296-1,473 MD 4,298
Bone Spring-4,186 MD 7,011-4,200 MD 7,025
Bone Spring 2-5,514 MD 8,339-5,541 MD 8,366
Bone Spring 3-6,333 MD 9,158-6,357 MD 9,182

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.