TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,572 FT ELB2,575 FT ELDelaware Consolidated G…Delaware Consolidated GasBell CanyonBell CanyonCherry CanyonCherry CanyonBone SpringBone SpringPermian (undifferentiat…Permian (undifferentiated)

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AGoliath Mipa Unit #131H
  • BGoliath Mipa Unit #1H
FormationAB
Castile117 MD 2,455CASTILLE—
Delaware Consolidated Gas-2,064 MD 4,636-2,054 MD 4,629
Ford / Delaware-2,064 MD 4,636—
Bell Canyon-2,064 MD 4,636-2,054 MD 4,629
Delaware-2,064 MD 4,636—
Cherry Canyon-2,987 MD 5,559-2,996 MD 5,571
Bone Spring-5,201 MD 7,773-5,215 MD 7,790BONE SPRINGS
Bone Spring 1-6,159 MD 8,731—
Bone Spring 2-6,739 MD 9,311—
Permian (undifferentiated)117 MD 2,455PERMIAN (UNDEFINED)-7,806 MD 10,381PERMIAN
Wolfcamp—-7,806 MD 10,381

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.