TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,000-0-2,000-4,000-6,000SUBSEA FTA2,850 FT ELB2,848 FT ELPermian (undifferentiat…Permian (undifferentiated)CastileCastileBell CanyonBell CanyonDelawareDelawareDelaware Consolidated G…Delaware Consolidated GasFord / DelawareFord / DelawareCherry CanyonCherry CanyonBone SpringBone Spring2ND Bone Spring2ND Bone Spring3RD Bone Spring3RD Bone Spring

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • APerch 57-1-27-15 D #14H
  • BPerch 57-1-27-15 F #16H
FormationAB
Permian (undifferentiated)2,122 MD 728PERMIAN (UNDEFINED)1,858 MD 990PERMIAN (UNDEFINED)
Castile2,122 MD 728CASTILLE1,858 MD 990CASTILLE
Bell Canyon2 MD 2,848-21 MD 2,869
Delaware-20 MD 2,870-21 MD 2,869
Delaware Consolidated Gas-42 MD 2,892-41 MD 2,889
Ford / Delaware-130 MD 2,980-56 MD 2,904
Cherry Canyon-962 MD 3,812-978 MD 3,826
Bone Spring-3,787 MD 6,637-3,821 MD 6,669
2ND Bone Spring-5,058 MD 7,908-5,070 MD 7,918
3RD Bone Spring-5,924 MD 8,774-5,953 MD 8,801

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.