TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.2 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA2,900 FT ELB2,890 FT ELCastileCastileBell CanyonBell CanyonDelawareDelawareDelaware Consolidated G…Delaware Consolidated GasFord / DelawareFord / DelawareCherry CanyonCherry CanyonBone SpringBone SpringBone Spring 2Bone Spring 2Bone Spring 3Bone Spring 3

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABulldog State 55-4-12-7 D #21HA
  • BBulldog State 55-4-12-7 B #13H
FormationAB
Castile244 MD 2,656CASTILLE234 MD 2,656CASTILLE
Bell Canyon-1,010 MD 3,910-1,028 MD 3,918
Delaware-1,010 MD 3,910-1,028 MD 3,918
Delaware Consolidated Gas-1,055 MD 3,955-1,073 MD 3,963
Ford / Delaware-1,130 MD 4,030-1,148 MD 4,038
Cherry Canyon-2,014 MD 4,914-2,031 MD 4,921
Bone Spring-4,535 MD 7,435-4,647 MD 7,537
Bone Spring 2-5,787 MD 8,687-5,831 MD 8,721
Bone Spring 3-6,585 MD 9,485-6,621 MD 9,511

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.