TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA2,728 FT ELB2,755 FT ELCastileCastileDelawareDelawareFord / DelawareFord / DelawareDelaware Consolidated G…Delaware Consolidated GasBell CanyonBell CanyonCherry CanyonCherry CanyonBone SpringBone Spring1ST Bone Spring1ST Bone Spring2ND Bone Spring2ND Bone SpringBone Spring 2Bone Spring 2

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AFolk Star C #C 26H
  • BIceman A #T 22H
FormationAB
Castile-335 MD 3,063CASTILLE-375 MD 3,130CASTILLE
Delaware-335 MD 3,063-1,375 MD 4,130
Ford / Delaware-1,335 MD 4,063-1,375 MD 4,130
Delaware Consolidated Gas-1,335 MD 4,063-1,375 MD 4,130
Bell Canyon-1,368 MD 4,096-1,406 MD 4,161
Cherry Canyon-2,284 MD 5,012-2,324 MD 5,079
Bone Spring-4,512 MD 7,240-4,555 MD 7,310
1ST Bone Spring-5,360 MD 8,088-5,455 MD 8,210
2ND Bone Spring-5,875 MD 8,603-5,642 MD 8,397
Bone Spring 2-5,875 MD 8,603-6,314 MD 9,069
3RD Bone Spring-6,413 MD 9,141—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.