TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA3,135 FT ELB3,136 FT ELBell CanyonBell CanyonCherry CanyonCherry CanyonBone SpringBone Spring1ST Bone Springs1ST Bone Springs1ST Bone Spring Sandsto…1ST Bone Spring Sandstone2ND Bone Spring Sandsto…2ND Bone Spring Sandstone

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AState Goodspeed 57-T2-45X4 BA #W201H
  • BState Goodspeed 57-T2-45X4 YA #X101H
FormationAB
Bell Canyon111 MD 3,024108 MD 3,028
Cherry Canyon-841 MD 3,976-831 MD 3,967
Bone Spring-3,547 MD 6,682-3,549 MD 6,685
1ST Bone Springs-4,520 MD 7,655-4,513 MD 7,649
1ST Bone Spring Sandstone-4,520 MD 7,655-5,344 MD 8,480
2ND Bone Springs-5,358 MD 8,493—
3RD Bone Spring Sandstone-6,103 MD 9,238—
3RD Bone Springs-6,103 MD 9,238—
2ND Bone Spring Sandstone-5,358 MD 8,493-6,104 MD 9,240
Wolfcamp—-6,642 MD 9,778

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.