TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA3,070 FT ELB3,070 FT ELCherry CanyonCherry CanyonBone SpringBone Spring1ST Bone Springs1ST Bone Springs1ST Bone Spring Sandsto…1ST Bone Spring Sandstone2ND Bone Spring Sandsto…2ND Bone Spring Sandstone2ND Bone Springs2ND Bone Springs3RD Bone Springs3RD Bone Springs3RD Bone Spring Sandsto…3RD Bone Spring Sandstone

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AState Goodspeed 57-T2-45X4 F #W109H
  • BState Goodspeed 57-T2-45X4 BG #W207H
FormationAB
Bell Canyon—80 MD 2,990
Cherry Canyon-882 MD 3,952-895 MD 3,965
Bone Spring-3,554 MD 6,624-3,556 MD 6,626
1ST Bone Springs-4,495 MD 7,565-4,511 MD 7,581
1ST Bone Spring Sandstone-4,495 MD 7,565-4,511 MD 7,581
2ND Bone Spring Sandstone-5,335 MD 8,405-5,326 MD 8,396
2ND Bone Springs-5,335 MD 8,405-5,326 MD 8,396
3RD Bone Springs-6,069 MD 9,139-6,058 MD 9,128
3RD Bone Spring Sandstone-6,069 MD 9,139-6,058 MD 9,128

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.