TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.2 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000-5,000-6,000-7,000SUBSEA FTA2,660 FT ELB2,659 FT ELCastileCastileFord / DelawareFord / DelawareBell CanyonBell CanyonDelawareDelawareDelaware Consolidated G…Delaware Consolidated GasCherry CanyonCherry CanyonBone SpringBone Spring1ST Bone Spring Sand1ST Bone Spring Sand2ND Bone Spring Sand2ND Bone Spring Sand3RD Bone Spring Sand3RD Bone Spring Sand

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ABat Masterson E #222H
  • BAffirmed B #223H
FormationAB
Castile-845 MD 3,505CASTILLE-905 MD 3,564CASTILLE
Ford / Delaware-1,845 MD 4,505-1,905 MD 4,564
Bell Canyon-1,845 MD 4,505-1,905 MD 4,564
Delaware-1,845 MD 4,505-1,905 MD 4,564
Delaware Consolidated Gas-1,845 MD 4,505-1,905 MD 4,564
Cherry Canyon-2,806 MD 5,466-2,864 MD 5,523
Bone Spring-4,964 MD 7,624-5,091 MD 7,750
1ST Bone Spring Sand-5,827 MD 8,487-5,817 MD 8,476
2ND Bone Spring Sand-6,414 MD 9,074-6,493 MD 9,152
3RD Bone Spring Sand-7,189 MD 9,849-7,225 MD 9,884

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.