TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-1,000-2,000-3,000-4,000-5,000-6,000-7,000SUBSEA FTA2,963 FT ELB2,961 FT ELCastileCastileDelawareDelawareBell CanyonBell CanyonCherry CanyonCherry CanyonBone SpringBone Spring1ST Bone Spring Sand1ST Bone Spring Sand2ND Bone Spring Sand2ND Bone Spring SandField Penetration PointField Penetration PointPhantom Field Penetrati…Phantom Field Penetration Point

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AState Cordell 42/4 #W101DM
  • BState Cordell 42/4 #W201CN
FormationAB
Castile681 MD 2,282CASTILLE644 MD 2,317CASTILLE
Delaware-988 MD 3,951-990 MD 3,951
Bell Canyon-1,013 MD 3,976-1,015 MD 3,976
Cherry Canyon-2,019 MD 4,982-1,997 MD 4,958
Bone Spring-4,538 MD 7,501-4,484 MD 7,445
1ST Bone Spring Sand-5,431 MD 8,394-5,370 MD 8,331
2ND Bone Spring Sand-6,116 MD 9,079-6,063 MD 9,024
Field Penetration Point-6,881 MD 9,844-6,832 MD 9,793
Phantom Field Penetration Point-6,881 MD 9,844-6,832 MD 9,793

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.